EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Photo voltaic Demand Controller can be a highly productive photo voltaic controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and method steadiness for a variety of photovoltaic (PV) applications.

Essential Options of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Solar Charge Controller technologies for exceptional solar Power harvesting. Crucial functions contain:

Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Confirm the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Find a perfectly-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Sustain appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Normally observe appropriate security protocols and make sure the process is driven off just before connecting components.

Move one: Link the battery terminals for the charge controller (favourable to beneficial, unfavorable to adverse).
Stage two: Join the solar panel array for the PV input terminals.
Step three: Connect the load terminals if utilizing a direct load relationship.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Power around the controller by connecting the battery initial.
Use the LCD Screen to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Guide, timer, light-weight Command.
five. Monitoring and Information Logging
The Tracer AN Collection supports authentic-time monitoring using the MT50 distant meter.
Knowledge is often logged by using the RS485 communication port using software program including Photo voltaic Station PC.
Distant monitoring can be done While Read more using the EPEVER WiFi module.
six. Troubleshooting Prevalent Concerns
Concern one: No Ability Output

Check battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Concern two: In excess of-Voltage Safety

Validate the photo voltaic array’s voltage ranking.
Modify procedure parameters if essential.
Situation 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Collection with MSR Technological know-how
The multiphase synchronous rectification engineering ensures:

Increased Effectiveness: Lessened energy losses all through conversion.
Improved Trustworthiness: Steady functionality under variable loads.
Lengthier Battery Lifetime: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Extraordinary option for optimizing solar energy technology and extending battery lifetime. By pursuing the above mentioned set up guideline, consumers can assure most performance and method longevity.