EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a really efficient solar controller made for off-grid solar programs. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for an array of photovoltaic (PV) programs.
Essential Options on the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for excellent photo voltaic energy harvesting. Key options consist of:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Innovative MPPT Algorithm with >99% performance.
Dual-Stage Charging for enhanced battery lifetime.
Liquid crystal display Show with serious-time details checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections from overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Phase-by-Move Guidebook to Setting Up the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Make certain all parts are included: Tracer AN unit, temperature sensor, interaction cables, and user handbook.
Validate the design variety and voltage scores match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a very well-ventilated, dry spot near to the battery bank.
Safe the Tracer AN controller using the presented mounting brackets.
Keep suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Warning: Normally abide by right safety protocols and make sure the system is driven off right before connecting factors.
Move one: Hook up the battery terminals to your cost controller (optimistic to good, negative to detrimental).
Phase 2: Join the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a immediate load relationship.
Phase 4: Double-Test all connections for polarity More info and tightness.
4. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time monitoring using the MT50 distant meter.
Info can be logged by means of the RS485 communication port applying computer software for example Photo voltaic Station Computer.
Distant monitoring is possible Along with the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Challenge 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Verify the photo voltaic array’s voltage score.
Adjust technique parameters if necessary.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technologies guarantees:
Better Efficiency: Diminished Power losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
More time Battery Life: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar energy technology and extending battery daily life. By next the above setup tutorial, users can guarantee utmost effectiveness and system longevity.